One of the worst things to happen is jumping in the shower, and your water is either freezing cold or way too hot. And that’s the very reason why having a water heater in your home is crucial. But believe it or not, your water heater works harder than you think to keep you and your family comfortable. And in time, water heaters work hard and for a long time, which can lead to problems that may require professional assistance. With this in mind, in this article, our plumbing professionals at Centerville Plumbing & Drain will help us go over everyday water heater problems that customers tend to run across and will share the best practices to get your water heater up and running for many years to come!
Does Your Water Temperature Seem To Be Fluctuating?
Did you know that water temperature is one of the most common problems water heaters experience? Some of the things you may struggle with are water being too cold, too hot, or not hot enough. Let’s review some of the possibilities below that cause it and how to prevent it.
1. Why is my water so cold?
Some causes of cold water running throughout your home are possibly a heating element has gone bad, a defective thermostat, or an insufficient power supply:
- You can analyze the problem by resetting any blown fuses or tripped breakers.
- Make sure you check to see if your power is still on; as easy as that sounds, that could be the reason.
- If you still have no hot water, check and ensure that your thermostat is functioning as it should.
2. Why is my water so hot?
Water running too hot in your home is likely caused by your thermostat being set too high. The US Department of Energy recommends you set the temperature for your water heater to 120 degrees Fahrenheit to guarantee the best-heated water.
3. Why is my water warm but not hot?
More likely, it’s due to a defective heating element, an undersized water heater, a faulty thermostat, or crossed cold and hot connections. The easiest way to rule out crossed connections is to turn off the water supply and switch on the faucet. You may have a crossed connection issue if the hot water still flows. If you still can’t find the problem with your water heater, it may be time to call your local plumbing company. Our professional plumbers are here to help assess whether your water heater is the correct size and to examine your water heater’s heating elements thermostat.
Have You Noticed Leaks In Your Water Heater?
Leaks in your water heat/ tank can happen for various reasons. Those reasons might be a stuck valve, improper water pressure, a bad gasket, faulty temperature, overheating water heater, or a leak from a nearby plumbing connection. You should check if you need to tighten any loose plumbing connections if you believe one of these issues above may be the culprit. And, if you continue to see a leak even after following the previous steps, we advise calling us to diagnose the issue you may have with your water heater.
Is The Water In Your Home Discolored?
You turn on your faucet, and your water comes out unusual and smells terrible. Usually, this is caused by the anode rod (a metal rod that runs down the center of your tank, usually made from magnesium) no longer working as it should, or perhaps it’s an older water tank that needs to be replaced. However, getting information from Centerville Plumbing & Drain would be your best choice so that we can decide if you need to replace the anode rod or perhaps install a new water heater for your home.
The Professionals Are Here To Help
Remember that it can be a big task if you need a minor fix or replace your water heater. Fortunately, our plumbing professionals at Call Centerville Plumbing & Drain can take care of that task, so you don’t have to! Call us today at (937) 240-0169 or schedule an appointment online by clicking here! We are here to help!
